6.odcinek ... <Premium ●>

: Once the back panel is in place, use the provided plastic pins or screws to lock it.

: If your floor is uneven, use the adjustable feet (if applicable) or small shims to ensure the piece sits flat and the drawers remain aligned. 6.Odcinek ...

: Screw the drawer slides (runners) onto the sides of the drawer. Make sure they are facing the correct direction so they glide smoothly into the main frame. 2. Inserting the Drawers : Once the back panel is in place,

: Tilt the drawer slightly to hook the rollers over the rails, then slide it in. It should feel smooth; if there is resistance, check if the rails are level. 3. Safety & Finishing Make sure they are facing the correct direction

: Attach the drawer sides to the front panel, ensuring the grooves for the drawer bottom are aligned.

: For any dresser taller than about 23-29 inches, it is critical to anchor it to the wall to prevent tipping. Use the L-brackets and wall anchors included in your kit.

: Insert the thin bottom panel into the grooves before attaching the back piece.