Delta 52 611 Sander Manual Link

: Must be secured to a workbench or floor; if using a workbench, drill four 3/8-inch holes to permanently bolt the base. 2. Setup and Installation

Slide the table assembly onto the rod and secure it with the secondary socket head screw. Delta 52 611 Sander Manual

: Tilts 45° out (away from belt) and 20° in (toward belt). : Must be secured to a workbench or

: Clean unpainted surfaces (like the table) with a cloth moistened with kerosene to remove protective coatings. Table Assembly : if using a workbench