If assembling a zipper from a continuous chain, insert the slider head by cutting a small V into the zipper teeth, feeding both sides in, and pulling the slider up.
Install a zipper foot on your sewing machine to allow stitching close to the teeth.
Press the edges of the fabric where the zipper will be installed to create sharp, clean edges. lb.zip
Switch to a basting stitch (long, temporary stitch) to close the remaining opening, and press the entire seam allowance open. Installation: Setting the Zipper
If needed, create secure bottom stops by stitching across the zipper teeth multiple times to prevent the pull from coming off. If assembling a zipper from a continuous chain,
Once secure, carefully remove the basting stitches in the middle of the seam to reveal the zipper. Finishing Touches
Use a top-stitch for a clean, secure, and professional look. Switch to a basting stitch (long, temporary stitch)
Installing a zipper, or a separated (like a jacket) one? Let me know, and I can tailor the instructions further. Install a Zipper in the Center of a Seam
Or send us an email at: [email protected]
