The hub's auto-sensing ports allow you to mix 10Mbps and 100Mbps hardware seamlessly.
The is a legacy 10/100 5-Port Ethernet Hub designed for simple, plug-and-play network expansion. Because it is an unmanaged hub, it does not have a web interface or software to configure—you simply plug it in and it works. Linksys Network Hub Nh1005 Manual Pdf txt
To connect this hub to another hub or a router, use the dedicated Uplink port (usually shared with Port 5 or labeled separately). The hub's auto-sensing ports allow you to mix
If only one device works, try power-cycling the hub by unplugging it for 10 seconds. To connect this hub to another hub or
If your model has an MDI/MDIX button, it must be depressed to use the uplink capability. LED Indicator Meanings Power Unit is powered on and ready Link/Act Port has a valid 10/100Mbps connection Link/Act Data is being transmitted or received 10/100M Port is operating at 100Mbps (Fast Ethernet) 10/100M Port is operating at 10Mbps status FDX/Col Port is in Full-duplex mode FDX/Col Collisions occurred (Port is in Half-duplex) Troubleshooting Tips
While a standalone PDF for the NH1005 specifically can be hard to find due to its age, it belongs to the EtherFast® 10/100 Workgroup Hubs series, which shares identical setup and operation.
The hub's auto-sensing ports allow you to mix 10Mbps and 100Mbps hardware seamlessly.
The is a legacy 10/100 5-Port Ethernet Hub designed for simple, plug-and-play network expansion. Because it is an unmanaged hub, it does not have a web interface or software to configure—you simply plug it in and it works.
To connect this hub to another hub or a router, use the dedicated Uplink port (usually shared with Port 5 or labeled separately).
If only one device works, try power-cycling the hub by unplugging it for 10 seconds.
If your model has an MDI/MDIX button, it must be depressed to use the uplink capability. LED Indicator Meanings Power Unit is powered on and ready Link/Act Port has a valid 10/100Mbps connection Link/Act Data is being transmitted or received 10/100M Port is operating at 100Mbps (Fast Ethernet) 10/100M Port is operating at 10Mbps status FDX/Col Port is in Full-duplex mode FDX/Col Collisions occurred (Port is in Half-duplex) Troubleshooting Tips
While a standalone PDF for the NH1005 specifically can be hard to find due to its age, it belongs to the EtherFast® 10/100 Workgroup Hubs series, which shares identical setup and operation.