Nb - Table Assembly (05-25-22).mp4 Apr 2026

: For models with power kits (like the 750 or 1,250 inverters), the unit is mounted and the switch is set to "auto remote" mode.

The assembly typically focuses on a modular, heavy-duty frame designed to hold power kits and industrial equipment. According to the NB Series Assembly Manual , the process generally follows these steps:

: Hardware can loosen due to the vibration of moving the workstation; connections should be checked and re-tightened periodically. Assembly Instructions TABLE NB - Table Assembly (05-25-22).mp4

: Ensure the battery voltage does not drop below 10.8V to maintain operation. Accessory Installation :

: The vertical mast is secured to the base, which often features large industrial casters for mobility. : For models with power kits (like the

: Always ensure the table is on a flat, level surface and that casters are locked before use.

: Must be mounted to the underside of the shelf before the shelf is attached to the mast. Assembly Instructions TABLE : Ensure the battery voltage

: To avoid warping the frame, tighten all bolts in a sequential, circular pattern rather than fully tightening one at a time.