Watch Ssis 526 Uncen · Authentic

local_planner: "TebLocalPlannerROS"
parameter_name_linear: "max_vel_x"
parameter_name_angular: "max_vel_theta"

min_particles: 50
max_particles: 1000

footprint: [ [0.26, 0.26], [0.26, -0.26], [-0.26, -0.26], [-0.26,0.26] ]
# robot_radius: 0.38 #0.38 
# footprint_padding: 0.05 
map_type: voxel
#track_unknown_space: true

obstacle_layer:
    origin_z: -0.1
    z_resolution: 1.8 #1.5 This must be higher than the z coordinate of the mounted lidar
    z_voxels: 1 
    obstacle_range: 10.0 #10.0
    raytrace_range: 15.0 #15.0
    observation_sources: laser_scan_sensor
    track_unknown_space: true
    lethal_cost_threshold: 100
    unknown_cost_value: 255 

    laser_scan_sensor: {data_type: LaserScan, topic: /scan, marking: true, clearing: true, min_obstacle_height: 0.00, max_obstacle_height: 3.00}
#point_cloud_sensor: {sensor_frame: lslidar_c16_frame, data_type: PointCloud2, topic: /lslidar_c16/lslidar_point_cloud, marking: true, clearing: true}
    
lowbstacle_layer:
    origin_z: -0.1
    z_resolution: 1.8
    z_voxels: 1
    obstacle_range: 3.5 #if beyond this threshold, then will not mark as obstacle
    raytrace_range: 5.0 #5.0 Lower this value to detect nearer obstacles with better accuracy
    observation_sources: obs_cloud mock_scan #butt_scan1 butt_scan2
    publish_voxel_map: true
    track_unknown_space: true
    lethal_cost_threshold: 100
    unknown_cost_value: 255

    obs_cloud:
        data_type: PointCloud2
        topic: /obstacles_cloud
        marking: true
        clearing: true
        min_obstacle_height: 0.01
        max_obstacle_height: 0.99
    mock_scan:
        data_type: LaserScan
        topic: /obstacles_scan
        marking: false
        clearing: true 
        min_obstacle_height: 0.00
        max_obstacle_height: 1.00
        inf_is_valid: true

inflation_layer:
    enabled: true
    cost_scaling_factor: 6.0 #added in by John
    inflation_radius: 0.39 #0.45 #Minimum value: 0.379
    
dynamic_obstacle_layer:
    enabled: false
    map_tolerance: 0.2
    footprint_radius: 0.5
    range: 2.0

  plugins:
    - {name: static_layer, type: "costmap_2d::StaticLayer"}
    - {name: obstacle_layer, type: "costmap_2d::VoxelLayer"}
    - {name: lowbstacle_layer, type: "costmap_2d::VoxelLayer"}
    - {name: dynamic_obstacle_layer, type: "dynamic_obstacle_layer::DynamicLayer"} # Uncomment to apply dynamic_obstacle_layer
    - {name: inflation_layer, type: "costmap_2d::InflationLayer"}

  plugins:
    - {name: obstacle_layer, type: "costmap_2d::VoxelLayer"}
    - {name: lowbstacle_layer, type: "costmap_2d::VoxelLayer"}
    - {name: inflation_layer, type: "costmap_2d::InflationLayer"}
    # - {name: range_sensor_layer, type: "range_sensor_layer::RangeSensorLayer"}